7 Layer Laminated Air Bubble Film Machine

UTOPE-1000-3500 Seven Layer Laminated Air Bubble Film Machine

Standard Machine Model:
1000mm / 7 Layers / 3 Screw / 3 Die Head / 2 Un-winder

1200mm / 7 Layers / 3 Screw / 3 Die Head / 2 Un-winder
1500mm / 7 Layers / 3 Screw / 3 Die Head / 2 Un-winder

1600mm / 7 Layers / 3 Screw / 3 Die Head / 2 Un-winder

2000mm / 7 Layers / 5 Screws / 3 Die Head / 2 Un-winder
2500mm / 7 Layers / 5 Screws / 3 Die Head / 2 Un-winder
3000mm / 7 Layers / 5 Screws / 3 Die Head / 2 Un-winder
3500mm / 7 Layers / 5 Screws / 3 Die Head / 2 Un-winder

With high output and low products weight to save raw material cost, weight can be from 30 GSM to 300 GSM and the weight of each layer can be adjusted. The both mono layer or co-extrusion layer are available produced by our machine, co-extrusion for nylon air bubble film will be more strength. Air bubble film can be double side in-line lamination with other material to become 5 layers, or dual forming station for 7 layers.

It is fully automatic control by screen touch panel, and can choice option to include perforation device, lamination device and unloading air bubble film roll parts. etc.

Application could be air bubble film package, with aluminum foil laminated is for insulation material, higher weight air bubble film laminated with woven fabric can be for solar pool cover… with foam, kraft paper etc. for more applications.

Machine Introduction:

1. Film width from 1,000mm to 3,500mm

2. Finished film 7 layers: laminated layer + base layer + bubble layer + PE middle layer + bubble layer + base layer + laminated layer

3. The laminated layer can be Aluminized foil, MPET foil, Kraft paper, EPE foam, BOPP film etc.

4. Bubble film thickness from 30gsm to 300gsm

5. Suitable raw material: LDPE/LLDPE(Virgin and 100% recycled material both ok)

LDPE MFI (Melt Flow Index): 2.0 ~ 2.5

LLDPE MFI (Melt Flow Index): 2.0 ~ 3.0

6. Default bubble round shape Φ10mm

7. Maximum rewinding diameter: 1500mm

8. Default voltage 3phase 4line 380v 50hz(accept voltage customization)

Machine Components:

1. Extruder Unit: Gearbox; Screw; Motor; Die Head

2. Control Box: Heating Control; Driving System

3. Bubble Forming Unit

4. Compound Unit

5. Traction Unit

6. Un-winder

7. Re-winder

Optional Accessories:

1. Automatic Cutter and Re-winder

2. Hydraulic Filter Screen Changer

3. In-line Edge Trim Recycler

4. Chiller

5. Air Compressor

6. Mixer

7. In-line perforator

FAQ

Q: Are you factory or trading company?

A: We are factory; you are warm welcome to visit our factory at any time.

Q: Where is your factory located? How can I get there?

A: Our factory is based in Ruian, Zhejiang province,China. You can fly to Wenzhou, or take fast train to Ruian. We can pick you up at the air port or train station.

Q: What is the shipping cost fromChinato my country?

A: It depends on the distance between your company and the sea port. We offer door to door service as long as you pay the relevant cost. For the shipping cost you can ask for our advice or from the logistic forwarder.

Q: This is the first time I use this kind of machine, is it easy to operate?

A: We will send you manual and guide video in English, it can teach you how to operate the machine. If you still can not learn how to use it, we can talk by phone, email or other contact ways.

Q: How to buy your machine?

A: Please send me inquiry to our email, when we reach an agreement, we will sign a contract to confirm our order.

http://www.utomachine.com/